Product Introduction
The micro nano aeration and reoxygenation device consists of a nano bubble machine, a dissolved gas system, and a release system. After mixing with water, the gas is pressurized and dissolved in a gas tank, and then released through a gas release device to form micro nano bubbles, which enter the water body at high speed. Micro nano bubbles with a diameter less than 50 μ m (traditional aeration bubbles are a few millimeters) have the following characteristics:
Self pressurized dissolution: The smaller the bubble, the higher the surface tension and internal pressure, which promotes accelerated gas dissolution.
Large specific surface area: Mass transfer efficiency far exceeds that of ordinary bubbles, and oxygen dissolution rate exceeds 85%.
Surface charge: capable of adsorbing suspended solids and colloidal particles in water.
Generating hydroxyl radicals: When bubbles burst, strong oxidizing substances are released, decomposing recalcitrant organic matter.
Equipment Selection
parameter
reference value
explanation
bubble diameter
Hundreds of nm~10 μ m
The smaller the bubble, the higher the mass transfer efficiency
Oxygenation ability
1.0-1.4 O₂kg/kWh
Intuitively reflect the operational efficiency of the equipment
Single processing capability
10-25m³/h
Select and configure based on the actual scale of the water body
Applicable water depth
1.5-5.0 meters
Shallow water will limit the effectiveness of use
Applicable pH value
5.0-9.0
Exceeding the range can easily reduce the service life of the equipment
Water temperature limit
≤50℃
Ensure stable operation of equipment
rated power
0.75-3.0kW
Adapt to different energy consumption requirements under different working conditions