CN

Product Center

Green Innovation · Scientific and Technological Development · Industrial Responsibility · Joint Construction of Civilized Ecology

Iron Manganese Filter

Mainly suitable for the pretreatment of groundwater, industrial softened water, and desalinated water in high-speed rail and high manganese areas.


National Service Hotline:400-611-6861
Product Introduction

Iron manganese filter is a specialized water treatment equipment designed to address the excessive levels of iron and manganese ions in groundwater, well water, and surface water. Through catalytic oxidation and precision filtration, it oxidizes divalent iron and manganese in water into insoluble sediment and intercepts and removes it, achieving clear water quality, no odor, no yellow rust, and no blockage of pipelines.


Technical Advantage
water quality stability
Stable effluent quality and high efficiency in removing iron and manganese;
Low maintenance cost
Low maintenance cost for non reactive sedimentation zone structures;
Intelligent control
Intelligent control eliminates the need for regeneration, saves water and electricity;
High utilization rate
No wastewater is generated during operation, with a water utilization rate of over 99%
Process Selection
Influent RequirementsIron content ≤20mg/L, Manganese content ≤3mg/L, Influent turbidity<20NTU            
Treatment EffectIron content ≤0.3mg/L, Manganese content ≤0.1mg/L, Effluent turbidity <3NTU
Air-water mixing time3-5min
Filter filtration velocity5-8m/h
Backwash intensity15-20L/(.s)
Inlet pressure≤0.06MPa
Operating pressure0.3-0.6MPa
Equipment Selection

Iron Content

Manganese Content

Treatment Method

0.3-1 mg/L0.1-0.3 mg/LSingle-stage iron and manganese removal filtration
3 mg/L/Single-stage iron and manganese removal filtration
1-6 mg/L0.3-2 mg/LAeration + single-stage iron and manganese removal filtration
6 mg/L2 mg/LAeration + two-stage iron and manganese removal filtration